Middleware Messaging Solutions

Event Management Module

The Fusion EMM is the “hub” of the Fusion series - Integrating with all other Fusion modules. Manages the interfacing between all disparate inputs and outputs. Built-in secure web client GUI for configuration and two-way messaging. Escalations, common messages, reminder messages and configurable user access rights/privileges.

Alarm Dispatch Module

The Fusion ADM integrates with any device that switches a contact (such as a door sensor) or generates a voltage (such as a warning LED). Each ADM has 16 inputs and multiple ADM units can be daisy-chained together to expand system capacity. Alarms can be configured as normally open/closed, momentary or latching with configurable delays, recipients and messages.

Cellular Messaging Module

The Fusion CMM is a 2G/3G/4G LTE messaging appliance able to send or receive SMS (Text) messages.

Intelpage IP Transmitter

The Fusion Intelpage IP5 is a 5 Watt VHF/UHF POCSAG paging transmitter that can be connected to your LAN or WAN for dispatching paging messages anywhere in the world. The Fusion Intelpage IP is also available in 25, 50 or 100 Watt versions depending on the site coverage required. Settings such as frequency and power levels can be changed via the web user interface.

Telephone Interface Module

The Fusion TIM is a multiport IVR (interactive voice response) device that users dial into via a telephone handset and follow voice prompts in order to initiate paging messages.

Relay Output Module

The Fusion ROM is an eight relay device that can connect and control almost anything that can be switched on or off, such as lights, sirens, fans, motors, locks, doors, pumps either manually or automatically based on events or schedules.

Telemetry Relay Module

The Fusion TRM is a POCSAG paging receiver capable of triggering its inbuilt relays. Wirelessly control lights, fans, motors, solenoids or switches using the eight (8) inbuilt relays. Alternatively, received messages can be forwarded to the onboard RS232 serial port. This can be used to control LED Signs or used as a “watchdog” for paging transmitters to ensure reliable message delivery. The Fusion TRM can also be used to receive messages from POCSAG wireless call points.

Transmitter Multiplier Module

The Fusion TMM is a POCSAG signal splitter used to seamlessly expand and simulcast any number of transmitters onsite. A single Fusion TMM can accept the POCSAG input from a Fusion EMM and split the signal into four transmitter signal outputs. Useful for covering multi-story buildings with multiple transmitters or for filling in dead spots such as stair wells and basements.

Fusion Pro is a complete critical messaging system, in a convenient ready to install 2RU rack chassis. This powerful self-contained embedded network appliance does not require a PC or other expensive software to operate. Once installed and configured, via the easy to use and secure web interface, Fusion Pro monitors all of your onsite systems and automatically distributes alerts to the appropriate personnel as critical events occur.

Fusion Pro can be used to monitor anything including fire and security alarms, PLC, air conditioning and cooling systems, toxic gas sensors, building management, access control, patient monitoring and nurse call, UPS, Gaming systems, IT networks or any other onsite device.

Improve staff performance and customer satisfaction with real time two-way messaging to almost any wired or wireless device including Smartphone push notification App, 4G SMS text messaging, E-mail, Wi-Fi/DECT/TETRA handsets, low cost pagers, LED Signs and more.

Fusion Pro contains a built-in:
- 5 Watt POCSAG paging transmitter for messaging to pagers.
- 3G/4G cellular modem for sending/receiving SMS text messages.
- Sixteen dry contact or OPTO coupled inputs for triggering alerts from switches or voltage changes.
- Three analogue telephony lines for integration with your onsite PABX or phone system for IVR (interactive voice response) messaging.

MAXpage is a standalone desktop paging system with the capacity to store up to 1,000 contacts. Its large back-lit keypad and LCD allows you to send free-form numeric messages directly from the keypad as well as pre-programmed alphanumeric messages using the four on-board function keys.

For those companies that require alphanumeric paging, MAXPage has a keyboard port. To send alphanumeric messages or configure the MAXPage terminal, simply plug in the optional MAXPage keyboard.

Maxpage has an inbuilt 5 Watt transmitter available in VHF or UHF to give you up to a 2km (1mile) in range. The frequency and power levels of the built-in transmitter can also be adjusted using the keypad menu.

MAXPage can be connected to a telephone port or PABX so that anyone can dial in and send messages remotely. Callers are greeted by a series of voice prompts that guide the caller through the simple message dispatch process.

An onboard RS232 serial port can be used to receive and relay messages from any device that sends messages in TAP, ESPA, Visiplex, COMP, Scope or TEKK format. MAXPage seamlessly transmits these messages as they arrive. MAXPage can also be operated using a Windows front end application which also operates via the serial port.

MAXPage contains four dry contact alarm inputs. Once an alarm is activated, a predefined alphanumeric message is sent to a pager or group of pagers. If the alarm is not reset within a predetermined time, the alarm message can be escalated to another pager or group.